Root I9505XXUAME2 Samsung Galaxy S4 LTE GT-I9505 4.2.2 Jelly Bean Update

Here’s how to root the Samsung Galaxy S4 LTE GT-I9505 runs with build version I9505XXUAME2 Android 4.2.2 Jelly Bean update. This root method uses Chainfire’s CF-Auto Root that has been tested and it worked to this latest firmware update XXUAME2 on all Galaxy S4 I9505 variants. This root method is the safest way to root the Samsung Galaxy S4 that we highly recommend for beginners, since it’s too easy to install and the process is not too complicated to follow with.

Again, this root guide is intended to use with Samsung Galaxy S4 GT-I9505 with Qualcomm Snapdragon 600 only, and this should not be used to root on other variants such asthe Galaxy S4 GT-I9500 which has the Samsung Exynos CPU’s. Prior to use this root method on other Samsung Galaxy S4 variants other than with the specific model number GT-I9505 may result to possible bricks. You may first check your device model number and software info by hitting
Settings -> About device -> Model number and software version. 

Root Samsung Galaxy S4 I9505 XXUAME2
Samsung Galaxy S4 GT-I9505 I9505XXUAME2 Android 4.2.2 Jelly Bean Update

Disclaimer: We at and the developer of this rooting technique (Chainfire) shall not be held responsible if anything happens to your device. You may proceed at your own risk!

How to Root Samsung Galaxy S4 I9505 with firmware build I9505XXUAME2 Android 4.2.2 Jelly Bean

  • Make sure that your phone is fully charge.
  • Back up all important files stored from the phone’s memory such as contacts, messages, pics, videos and etc.
  • Use Windows based computer or laptop, Odin will not work on MAC and LINUX.

Download Chainfire’s CF-Auto Root for Samsung Galaxy S4 GT-I9505  – CF-AUTO ROOT (consider a donation to Chainfire for continued development)

Install the latest Samsung Galaxy S4 USB driverhere
Odin Flasher Tool for Galaxy S3 Odin3_v3.07. here

Step 1. Extract the downloaded so that you’ll get the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 Odin flashable file. You can use Winzip, 7zip or any extracting tool you have in your computer.
Step 2. Run Odin3_v3.07.exe in your computer
– Make sure NOT TO CHECK this option “Re-Partition”. Leave  others checked.

Step 3. Click on the PDA button the browse and select the CF-Auto Root tar file.

PDA button: “CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5

Root Samsung Galaxy S4 GT-I9505
Odin Flashing CF-Auto Root on Samsung Galaxy S4 GT-I9505

Step 4. Set your phone in download mode (Turn off phone, then hold Volume Down+Home+Power button simultaneously) Then it ask you to press a Volume Up button to continue.

Step 5. Connect the phone to your computer via USB cable. You will then see an ID:COM number which is being highlighted in color blue and a word “Added!”  it indicates that your device is recognized with Odin. If you can’t see such indications, make sure to re-install the driver correctly and check your USB cable and your computer’s USB port for possible issues.

Step 6. Hit the “START” button to flash the root file onto your Samsung Galaxy S4 GT-I9505.

Step 7. Wait until it finishes flashing, you can see a word “PASS” once it’s successfully completes.
This process will only takes around 30 seconds to complete or until the phone completely reboots.

Done! remove the phone from computer connection.

NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin“Auto Reboot” is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This willstart the install process.

Fixing possible errors while installing CF-Auto root on my Galaxy S4 GT-i9505

If you followed the odin flashing correctly and it seems it doesn’t successfully  installed. All you need is repeat the whole process, just make sure everything runs smoothly, you can check your USB cable, USB port, re-install the USB driver and closed any programs runs on the system that sometimes causes the error problems.  

How to reset the binary flash counter on Samsung Galaxy S4?
Installing CF-Auto-root on your Samsung Galaxy S4 will tripped the binary flash counter but you can simply reset it back to normal by applying triangle away apps that was created also by Chainfire.

How to unroot my Samsung Galaxy S4?
Your Samsung Galaxy S4 will automatically lost root once you get a new firmware updates again but if you wish to undo root anytime you want, all you need is flash your device original stock firmware.

Does this root method worked on your Samsung Galaxy S4 that runs with Android 4.2.2 Jelly Bean build I9505XXUAME2? Just tell us if this root method has failed to work and any other issues you might encountered.

2 thoughts on “Root I9505XXUAME2 Samsung Galaxy S4 LTE GT-I9505 4.2.2 Jelly Bean Update”

Leave a Reply

Your email address will not be published. Required fields are marked *